Technical
Software
Titanium
Finance & Accounting
Purchase Request
Knowledgebase
How to

New Classroom Setup in LSC-648 & 745

Creation date: 10/3/2023 11:42 AM Updated: 10/3/2023 12:02 PM

iMac Computer (How to Power On)

To turn on the iMac, locate the Power Button in the lower right-hand corner of the back of the computer. Press the Power Button and wait for a few seconds until you hear a startup chime. The startup chime confirms that the computer has

started up successfully.

Classroom Controls

A control panel is on the wall behind the computer/desk. Below is a diagram that shows the buttons you need to know.

Display
Turn the projector ON or OFF.

iMac Button
To use the iMac, press the LAPTOP VGA button.

Laptop Button
To use a laptop, press the LAPTOP HDMI button.

Volume Control
Adjusts the volume on the projector.

Camera Remote

Auto-Tracking

On the camera remote, you can turn Auto-Tracking ON or OFF.

Presets

Set Preset

Manually set a preset position for a camera. Position the camera where you want it to face using the Arrow buttons on the camera remote. Next, press [PRESET] + [Number (0-9)] if you wish to assign the preset.

Clear Preset (Erase a Preset position)

To erase a Preset, press [RESET] + [Numeric button (0-9)]

To erase all Presets, press [*] + [#] + [RESET]

Home

Press [Home] to reset the camera position back to the front.

Using Zoom

LSC-648 & 745 have three cameras you can choose from in Zoom—FaceTime HD Camera and two UT-VID Cameras.

FaceTime HD Camera:
The camera built into the iMac. The camera is a little black dot near the display's top edge.
UT-VID ##### Cameras
There are two wall-mounted cameras in the classroom. Switch between them to select your desired view.